Slab foundation building in Palm Bay FL - a solid floor poured at the right height
Planning a new home or addition on a Palm Bay lot? We form, pour and cure the slab so your build can keep moving.

We walk your lot first
We come out to walk your lot and talk through the slab. You hear the whole plan, from slab height to grade, before anything is priced.
Licensed and insured on every slab
Full Throttle Concrete is licensed and insured. Your slab carries the whole house, so check that on anyone you're thinking of hiring, and we're glad to go over ours at the estimate.
Family-owned, founded in 2021
Full Throttle Concrete started in 2021, and we run it as a family business that cares about clean edges and a clean finish on every pour. Call (321) 447-2715 or send us your lot details to get started.
Slab foundation building in Palm Bay
Slab foundation building is forming, pouring and curing the concrete slab that becomes your home's lowest floor. We pour them for Palm Bay owners putting up a new house or an addition who need a solid floor to build on.
On a new build, the first thing we settle with you is the slab height. Palm Bay's floodplain review checks the lowest floor, porches and garage slab included, against your permit before construction can continue, and the work waits there until the floor passes. Floodplain permits go through the city's Growth Management Department at (321) 952-3400 ext. 5246, and the city posts its own slab requirements for residential permits.
Price mostly follows the slab's size and thickness, how much digging, fill and base work the lot needs, and how close the truck can get to the forms. The city also wants the finished ground against the house to sit above the flood level set for your area, so on a low lot, raising the grade is part of the job and the cost. The schedule turns on the city's checks and the weather, and your own figure comes from the estimate.
Slab foundations, footings and the ground around them
Under the slab comes first
The part of a slab you'll never see does the most work, so that's the last place we'd save money. We dig out and pack the subgrade, the soil the slab sits on, instead of raking it level, because loose dirt settles and takes the slab with it. Then we set the forms, tie in concrete footings where the plan calls for them, and place rebar, the steel that keeps cracks from spreading apart. If the budget's tight, we'd trim a finish before we'd trim the base.
Pouring and finishing without extra water
Hot weather guidance says crews shouldn't add water to the concrete, even to cool it or make it easier to spread, because extra water can cost the slab strength and durability down the road. Ask any crew how they handle heat, us included. While we finish, we watch for plastic shrinkage cracks, a web of fine surface cracks that can show up on fresh concrete, and we cut control joints, planned grooves that give the slab a straight place to crack instead of anywhere it likes.
Curing, clean edges and the grade
Curing, the wait while fresh concrete holds its moisture and gains strength, starts right after placement, and industry guidance lists a curing compound, steady soaking, wet burlap or plastic, or curing paper. We'll tell you which one we plan for your slab. Clean edges matter to us on every pour, and if an older slab on your property has broken edges, we repair those too. Where a raised pad needs soil held back at its edge, a concrete retaining wall keeps that fill in place.
Get an estimate for your slab foundation
Send your lot address and any flood zone details, and we'll reply within one business day to set up a free in-person estimate. There's no obligation, and no pressure to book.
(321) 447-2715How a Palm Bay slab job runs
Call and we'll walk the lot
Call (321) 447-2715 or send the form, and we'll come out to look at the lot with you. Have your lot address and any flood zone details ready, because the slab height and the grade work shape the whole plan and the price.
Base, forms and the survey
We aim to arrive on schedule and keep the work area tidy while we build the base and set the forms and steel. The pour date waits on the formboard survey the city requires, so that gets booked first.
Pour, finish and start the cure
On pour day we place and finish the concrete, start the cure and clean up before we leave. The elevation certificate the city wants comes next, before any walls go up, so give your builder a heads-up.
Slab foundation questions in Palm Bay
Do I need a survey before pouring a slab in Palm Bay?
Yes. Palm Bay's floodplain review requires a formboard survey before any concrete is poured, so it has to be on the calendar ahead of the pour date. After the pour and before any walls go up, the city also calls for a signed and sealed Elevation Certificate on the building, so plan for that step too.
How much does a slab foundation cost in Florida?
An installed 4-inch concrete slab, labor and materials included, usually costs about $8 to $14 per square foot in Florida. That's a statewide range, not our price. Your Palm Bay slab comes down to its size, the base and grade work, and access for the truck, so your real number comes from an estimate at your lot.
Can I build my own slab foundation in Florida?
Yes, Florida law lets you act as your own contractor on a one- or two-family home for your own use, if it isn't offered for sale or lease and you directly supervise on site all work not done by licensed contractors. If you sell or lease it within a year, the law presumes it was built for sale, and anyone you hire as a contractor still needs a license.
Why do concrete crews pour at night in Palm Bay?
Hot weather guidance advises placing concrete during cooler parts of the day, such as at night, to limit how much heat it takes while it sets. So expect us to schedule your pour for a cool hour, which may mean a night pour. Concrete poured in midday heat can end up with a weaker, dusty top.
