Full Throttle Concrete

Garage floor concrete in Palm Bay FL - a slab built for heavy use and easy to clean

Cracked, stained or sinking garage floor? We pour a new slab with a clean, hard-wearing surface made to carry your cars and wash down easily.

Garage floor concrete in Palm Bay, FL

We come out to measure

We come out to look at your garage floor before anything gets priced. We're family-owned and operated, and we've been in business since 2021.

Licensed and insured before we pour

We're licensed and insured, and we'll go over that with you at the estimate, before you sign anything. Ask the same of every company you're comparing, because a garage slab is too big a job to hand to someone you haven't checked.

Clean edges, backed by our guarantee

Clean edges and a clean finish matter to us on every pour, and the work is backed by our satisfaction guarantee. Call (321) 447-2715 or send us the estimate form to get started.

Planning a garage floor slab in Palm Bay

Garage floor concrete is a slab poured to carry the weight of your cars, usually with rebar or wire mesh, steel bars or a steel grid, set inside it. We pour these floors for Palm Bay homeowners replacing a cracked or sinking garage floor, or finishing a new garage.

The price mostly comes down to the size of the garage, how thick the slab is and whether it gets steel. Garage slabs go thicker than a patio because they carry more weight, and a plain pad without reinforcement costs less per foot than a reinforced one. Tearing out an old floor adds work, and staining or stamping adds to the bill too. We'll give you the figure for your garage at the estimate.

The schedule turns mostly on the cure, the wait while concrete hardens and gains strength, because you can't park on the slab until it's ready, so plan where the cars go for a while. Rain and heat move pour days around, and any permit has to be in hand before we start. If you plan to coat the floor later, tell us early, because that changes what goes under the slab.

How we build a garage floor, base to finish

Old floor out, base dug and packed

If your garage floor is cracked or sinking, we break it out and haul it off, then dig out and pack the subgrade, the soil the slab sits on, instead of just raking it level, because loose dirt settles and takes the concrete with it. We also check where water runs so it heads out the door, not toward the house. If the sinking traces back to the house itself, foundation raising is the place to start. When a budget gets tight, we'd rather spend on the base than the finish, because a nice top on soft ground still cracks.

Thick enough for what you park

Garage slabs run thicker than patios and walks because cars and trucks are heavy, and we'll tell you how thick we plan yours and why, based on what you park. Rebar or mesh holds the concrete together so a crack stays tight instead of spreading. It's the same heavy-load thinking behind our concrete parking lot building, sized for a home. If you want a coating or covering later, industry guidance says it gets the most protection when the vapor retarder, a moisture barrier, sits right against the slab, so that's worth settling before we pour.

Poured and finished for easy cleanup

We'd rather start a pour in the cool of the morning than fight a Palm Bay afternoon, because concrete that dries too fast can leave a weak, dusty top. One concrete products maker's hot-weather guide says crews shouldn't add water to cool the mix or make it easier to work, since that water can hurt its strength and durability, so it's fair to ask any crew how they handle heat. We trowel the floor smooth so it sweeps and hoses off easily, and cut control joints, shallow grooves that give the slab a planned place to crack, before it picks its own.

Get a garage floor estimate from Full Throttle Concrete

Send the form or call (321) 447-2715, and we'll reply within one business day to set up a free in-person estimate, with no pressure to book. Have your garage size handy, plus any plan to coat the floor.

(321) 447-2715

Your garage floor job, step by step

  1. We come out and measure

    After you reach out, we come to your house in Palm Bay or around Brevard County and nearby, including Melbourne, Sebastian and Vero Beach, to measure the garage and look at the old floor. Then we go over the slab plan and your price.

  2. Check permits before the pour

    Before we set a pour date, check permits with the city. If your lot sits on a Melbourne-Tillman canal and the job needs temporary access to its right-of-way, the water control district's permit comes first, and the city issues its own only after that.

  3. Pour, finish and clean up

    On pour day we aim to show up on schedule and keep the work area tidy while we work. Once the floor's finished and the joints are cut, it needs time to cure before the cars go back in, so plan around that wait.

Garage floor questions from Palm Bay homeowners

How much does a garage floor slab cost in Palm Bay?

A reinforced concrete slab in Palm Bay usually costs about $7 to $11 per square foot, which is the going rate around here, not our quote. Because it's priced by the foot, your garage's size drives most of the total, along with tear-out and finish choices. We'll price your floor at the estimate.

How soon can I park on a new garage floor?

Waiting about a week before you park on it is the safe call, even though a new slab should be fine to walk on within 48 hours. Concrete takes about a month to fully cure, so it keeps getting stronger after you start using it.

Does pouring a garage floor in Palm Bay need a permit?

That depends on the work and where your home is, so check with the city first, since work begun without a required permit is subject to code enforcement. The city's Land Development office issues permits for concrete flatwork, ground-level slabs like driveways, not involving a future structure, so ask them how that fits your garage.

How do I check a concrete contractor's license in Palm Bay?

Ask for the contractor's state license number, which printed ads must show, and call the Department of Business and Professional Regulation at (850) 487-1395 with questions. State and local law require anyone doing construction work on your property to be licensed, state certified or registered, and Brevard County's contractor licensing office registers certified contractors and tracks their insurance.